Today was a fun day
#1
Posted 08 December 2009 - 03:33 PM
#2
Posted 08 December 2009 - 03:49 PM
What did you do today in CATV land? I hung snow shoes all day in the rain.. I'm wet and cold, but I love it
2 Cable cut ins (in a light rain)
3 power supplies maintained
2 Maintenance Tickets
1 TDR old .500 MC2
Picked up 5 EOL for maintenance requirements
Tomorrow is Ingress, Ingress, Ingress and I think I have finished I will work more Ingress
olo131
#3
Posted 08 December 2009 - 04:30 PM
What did you do today in CATV land? I hung snow shoes all day in the rain.. I'm wet and cold, but I love it
2 Cable cut ins (in a light rain)
3 power supplies maintained
2 Maintenance Tickets
1 TDR old .500 MC2
Picked up 5 EOL for maintenance requirements
Tomorrow is Ingress, Ingress, Ingress and I think I have finished I will work more Ingress
olo131
Noise will always rear it's ugly head!
#4
Posted 08 December 2009 - 06:31 PM
was dispatched for sever ingress at a node. I watched it for an hour a few amps away and didn't see a thing. 2 hours later our dispatch said the MTC had switched a card and it's been gone since.
Went to do another call put in for low Mer/ber. Found out last night that the MER/BER/QAM feature on my meter isn't working, i tried again tonight and it's still not working.
swept one amp
Went home for lunch. Had a turkey sandwich with 2 eggs.
Went to a different zone to help a friend that has some digging to do to fix a cli leak and channel 2 problems. Waiting for him now, staying warm.
#5
Posted 08 December 2009 - 06:37 PM
1 bullshit call put in by our contractor for "no dial tone out of the taP" It's doubtful that he even knows what a tap looks like.
was dispatched for sever ingress at a node. I watched it for an hour a few amps away and didn't see a thing. 2 hours later our dispatch said the MTC had switched a card and it's been gone since.
Went to do another call put in for low Mer/ber. Found out last night that the MER/BER/QAM feature on my meter isn't working, i tried again tonight and it's still not working.
swept one amp
Went home for lunch. Had a turkey sandwich with 2 eggs.
Went to a different zone to help a friend that has some digging to do to fix a cli leak and channel 2 problems. Waiting for him now, staying warm.
Waiting for him now you know you post this at 8:30 at night? A little late to be digging don't you think. STS I think Forbins is more dedicated than you.
olo131
#6
Posted 08 December 2009 - 07:08 PM
Dug out 3 peds, cleaned out mouse nest in 2, replaced load coil in third, got truck stuck 2x. Replaced 1 NID box, got stuck again, installed 3 single lines, fortunately existing homes with cut thru paths.
#7
Posted 08 December 2009 - 07:12 PM
I know its not CATV related but...
Dug out 3 peds, cleaned out mouse nest in 2, replaced load coil in third, got truck stuck 2x. Replaced 1 NID box, got stuck again, installed 3 single lines, fortunately existing homes with cut thru paths.
That fits in the NOT category if it is CATV or Tele
olo131
#8
Posted 08 December 2009 - 07:23 PM
It fits into the cold as f**k category thats for dam sureI know its not CATV related but...
Dug out 3 peds, cleaned out mouse nest in 2, replaced load coil in third, got truck stuck 2x. Replaced 1 NID box, got stuck again, installed 3 single lines, fortunately existing homes with cut thru paths.
That fits in the NOT category if it is CATV or Tele
olo131
Im just glad there was a helpful farmer all 3x I got stuck and offered to pull me out and I didnt have to dig out or wait for a wrecker
#9
Posted 08 December 2009 - 07:41 PM
Getting maps together for tomorows ride out.
and met with customer to discuss const costs and options
BLAH BLAH BLAH....
As the lasher turns these are the days of my life
WP
#10
Posted 08 December 2009 - 08:38 PM
1 bullshit call put in by our contractor for "no dial tone out of the taP" It's doubtful that he even knows what a tap looks like.
was dispatched for sever ingress at a node. I watched it for an hour a few amps away and didn't see a thing. 2 hours later our dispatch said the MTC had switched a card and it's been gone since.
Went to do another call put in for low Mer/ber. Found out last night that the MER/BER/QAM feature on my meter isn't working, i tried again tonight and it's still not working.
swept one amp
Went home for lunch. Had a turkey sandwich with 2 eggs.
Went to a different zone to help a friend that has some digging to do to fix a cli leak and channel 2 problems. Waiting for him now, staying warm.
Waiting for him now you know you post this at 8:30 at night? A little late to be digging don't you think. STS I think Forbins is more dedicated than you.
olo131
I think he is!
#11
Posted 08 December 2009 - 08:39 PM
Freaking paperwork....
Getting maps together for tomorows ride out.
and met with customer to discuss const costs and options![]()
BLAH BLAH BLAH....
As the lasher turns these are the days of my life![]()
WP
Sounds like a good day!
#12
Posted 08 December 2009 - 08:44 PM
1 bullshit call put in by our contractor for "no dial tone out of the taP" It's doubtful that he even knows what a tap looks like.
was dispatched for sever ingress at a node. I watched it for an hour a few amps away and didn't see a thing. 2 hours later our dispatch said the MTC had switched a card and it's been gone since.
Went to do another call put in for low Mer/ber. Found out last night that the MER/BER/QAM feature on my meter isn't working, i tried again tonight and it's still not working.
swept one amp
Went home for lunch. Had a turkey sandwich with 2 eggs.
Went to a different zone to help a friend that has some digging to do to fix a cli leak and channel 2 problems. Waiting for him now, staying warm.
Sounds like a productive day with the exception of your fart filled truck! Them eggs had to play a roll lol..
#13
Posted 08 December 2009 - 08:45 PM
It fits into the cold as f**k category thats for dam sureI know its not CATV related but...
Dug out 3 peds, cleaned out mouse nest in 2, replaced load coil in third, got truck stuck 2x. Replaced 1 NID box, got stuck again, installed 3 single lines, fortunately existing homes with cut thru paths.
That fits in the NOT category if it is CATV or Tele
olo131
Im just glad there was a helpful farmer all 3x I got stuck and offered to pull me out and I didnt have to dig out or wait for a wrecker
Been pulled out a few times by farmers myself lol..
#14
Posted 08 December 2009 - 08:52 PM
No I'm not overly dedicated Olo, (More dedication than a slacker, but less than an overachiever :) i just happen to work 2nd shift. 3:30 to midnight. Good times.
#15
Posted 08 December 2009 - 08:56 PM
yup, luckily I only had 2 eggs :) I'll be done in 14 minutes. Couldn't fix the leak or find it. Dug down about 3 feet and all our lines were surrounded by huge roots. Even if we dug down deeper and found the cable, it would be impossible to get in there to splice it so we're putting it in for new cable.
No I'm not overly dedicated Olo, (More dedication than a slacker, but less than an overachiever :) i just happen to work 2nd shift. 3:30 to midnight. Good times.
Nothing at all wrong with getting new cable laid in...
#16
Posted 08 December 2009 - 10:04 PM
#17
Posted 09 December 2009 - 06:16 AM
No I'm not overly dedicated Olo, (More dedication than a slacker, but less than an overachiever :) i just happen to work 2nd shift. 3:30 to midnight. Good times.
So your saying you are somewhere between STS and I with STS being the Slacker.
Sorry STS, you didn't think I was going to be the slacker did you?
olo131
#18
Posted 09 December 2009 - 11:24 AM
No I'm not overly dedicated Olo, (More dedication than a slacker, but less than an overachiever :) i just happen to work 2nd shift. 3:30 to midnight. Good times.
So your saying you are somewhere between STS and I with STS being the Slacker.![]()
Sorry STS, you didn't think I was going to be the slacker did you?![]()
olo131
ROFL.. I guess cause I really didn't do a damn thing yesterday lol..
#19
Posted 09 December 2009 - 04:12 PM
Wednesday: Safety meeting, pulled new QC route, run QC route
The day to come: Safety guy will be here for inspection, finding a place to hind from safety guy, hear everyone bitch after he leaves, come out of hiding, go home. Damn, I forgot, I will be with safety guy. So much fun when I was a tech. :D
#20
Posted 09 December 2009 - 05:41 PM
Similar Topics
Evidentiary Hearing on Proposed Overhead Powerline to Begin TodayStarted by Guest_Lightningrod_* , 09 Apr 2013 |
|
|
||
Got to play with a 60S today!!Started by Guest_olo131_* , 29 Jan 2013 |
|
|
||
This landed on my plate todayStarted by Guest_Nexis_* , 06 Feb 2013 |
|
|
||
Basic cable tier encryption allowed starting todayStarted by Guest_olo131_* , 11 Dec 2012 |
|
|
||
Not a fun day today!!!Started by Guest_Lightningrod_* , 07 Oct 2012 |
|
|
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users









